Canon BJ 330 Prints Light

Back to Inkjet Articles

"I have a canon BJ330 that starts printing light and prints nothing. This only happens approx once every 2 months. The unit has ink and it still thinks it's printing but there is no ink on the paper. This has happened a couple of times and so far I haven't figured out what it is that I do to 'correct' the problem.
I was thinking that there must be a way to clean the printhead that is not in the service manual. Which I do not have, anyway."

On my DeskJet, I just blow gently into the vent hole on the ink cartridge. I then wipe off blob of ink that forms on on the head and it works like a charm - if you don't get ink all over everything. Perhaps, try the following first:

(From: russrite@magmacom.com).

Remove the sponge from the purge cap carefully, try washing in water carefully, and reinstall it:

• Remove the top cover to expose the printer power on the printer when the printhead moves away from home position SHUT OFF the power
• You will see a rubber rectangle cap towards the bottom of it is the sponge (called an 'Ink Absorber')

Printer and Photocopier Troubleshooting and Repair Collection
Version 2.48
Copyright © 1996-2001
Samuel M. Goldwasser
--- All Rights Reserved ---
For corrections/comments/suggestions, please contact me via the Sci.Electronics.Repair FAQ Email Links Page.
Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied:
1. This notice is included in its entirety at the beginning.
2. There is no charge except to cover the costs of copying.

All Printer Cartridge Articles