Epson Error Light Problems

Epson Stylus Color IIS error light problems

"The error light on the Epson Stylus color IIs keeps blinking. The color cartridge is new. The black and white prints perfect."

(From: Robert J. Brancatelli (bronco@mkol2.dseg.ti.com).)

Most likely, the new color cartridge is not seating all the way. Move the print head to where you normally do to swap the heads. Now, without removing the color print head, lift the most forward lever up as far as it will go, then bring it down to reseat the ink cartridge.

Printer and Photocopier Troubleshooting and Repair Collection
Version 2.48
Copyright © 1996-2001
Samuel M. Goldwasser
--- All Rights Reserved ---
For corrections/comments/suggestions, please contact me via the Sci.Electronics.Repair FAQ Email Links Page.
Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied:
1. This notice is included in its entirety at the beginning.
2. There is no charge except to cover the costs of copying.

All Printer Cartridge Articles