Response Times of Resistance Heater Elements in Inkjet Printers

Back to Inkjet Articles

The ink drops that make up the 'image' on the paper from an ink jet printer are expelled by microscopic resistance (thin film or the like) heaters with response times in the 10s of microseconds if I recall correctly. When living in the macro world, it is often counterintuitive to realize that a resistance element can have such a fast thermal response.

(From: John Eaton (johne@vcd.hp.com).)

The trick is that a lot of the energy that you pump into the resistor leaves the printhead with the fired dot. One way to detect Out_of_Ink is to mount a thermistor on the printhead and watch for a sudden rise in temperature as you are firing.

Printer and Photocopier Troubleshooting and Repair Collection
Version 2.48
Copyright © 1996-2001
Samuel M. Goldwasser
--- All Rights Reserved ---
For corrections/comments/suggestions, please contact me via the Sci.Electronics.Repair FAQ Email Links Page.
Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied:
1. This notice is included in its entirety at the beginning.
2. There is no charge except to cover the costs of copying.

All Printer Cartridge Articles